HP XP P9500 Storage User Manual
Page 118
Description
Error code (SSB2)
The command was rejected and the retry processing was ordered because P-VOL SUSPENDING
was detected when the RAID Manager horctakeover (resync) command was executed.
EB66
The command was rejected because a pair is already created with the specified S-VOL by using
Compatible FlashCopy.
EB6B
The Cnt Ac-J pair create processing was doubly executed:
EB6C
•
There are no problems if the initial copy operation is restarted when the primary storage
system is powered off.
•
There are no problems if a Cnt Ac-J pair is created when the primary storage system is reset.
The command was rejected because the Cnt Ac-J program product was not installed in the primary
system.
EB6E
The command was rejected because the specified S-VOL is assigned to a copy pair of other
program products.
EB70
The command was rejected because the specified S-VOL is the system disk.
EB73
The command was rejected because all mainframe connection CHAs are blockaded.
EB74
The command was rejected because the specified data volume is a command device.
EB78
The command was rejected because the specified data volume is online.
EB79
The command was rejected because the journal cache of the restore journal was remained.
EB7A
The command was rejected because the specified S-VOL is an external volume.
EB7D
The command was rejected because the specified S-VOL is in one of the following statuses.
EB7E
•
The specified S-VOL is being used for a Business Copy pair.
•
The specified S-VOL is a reserved volume.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is being used as Business
Copy P-VOL.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is the source volume of
Auto LUN.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is being used as Fast Snap
or Snapshot P-VOL.
The command was rejected because the emulation type of the specified S-VOL was unsupported.
EB7F
The command was rejected because the specified volume was the V-VOL or the pool-VOL. Please
check the status of the volume.
EB80
The command was rejected because the path from the secondary system to the primary system
was not set, or the S-VOL was in the SMPL status.
EB87
The command was rejected because of one of the following:
EB88
•
The specified S-VOL was being used as a Business Copy S-VOL.
•
The specified S-VOL was Not Ready, which means that the hard disk drive cannot be used.
The command was rejected because the emulation types of the specified P-VOL and S-VOL were
not the same.
EB89
The command was rejected because the emulation types of the specified master journal and the
restore journal were not the same.
EB8A
The command was rejected because the LUSE configuration of the P-VOL is different from the
LUSE configuration of S-VOL.
EB8E
The command was rejected because the specified pair could not transit the status.
EB94
The pair creation command was rejected because the specified S-VOL was not mounted on the
secondary system.
EB9F
118
Troubleshooting