HP XP P9500 Storage - Manual (Page 56)

•
Data for the selected volume displays in the P-VOL box. The numbers indicate the volume
port, GID, LUN, and volume
•
One P-VOL displays at a time, even if you selected multiple volumes for pairing. The
volume with the lowest number displays first.
5. Specify an S-VOL.
•
To create one pair, select the port, GID, and LUN from the three S-VOL boxes. If you
selected multiple volumes as P-VOLs, the S-VOL you specify is paired with the P-VOL
displayed in P-VOL.
•
If you selected multiple volumes as P-VOLs and want to create multiple pairs, do one of
the following using the Select Other S-VOL(s) list to assign S-VOLs:
- Select Increment to add the secondary system LUN incrementally. Your S-VOL LUN
numbers must be numbered incrementally. For example, if you create three pairs and
specify 011 on the LUN of P-VOL, the LUNs on the secondary system are incremented
at 011, 012, and 013.
- Select Input Next to specify S-VOL LUNs one at a time for each P-VOL. For example, set
the S-VOL LUN for the current P-VOL and click Set, then reopen the dialog box to set the
next S-VOL, and so on.
- Select Relative to P-VOL to add the S-VOL LUN closest to the P-VOL’s LUN. For example,
if the LUN of the three P-VOLs are 001, 005, and 006, and you select LUN 002 for the
first S-VOL, LUN numbers 006 and 007 are assigned by the system as the next two
S-VOLs.
6. In the Mirror box, proceed as follows.
1.
Select the master journal from the M-JNL list.
56 Pair operations