HP StorageWorks XP Remote Web Console Software - Manual (Page 25)

HPAV for z/OS user guide for the XP128/XP1024/XP12000/XP10000 25
Figure 5 Enabling Compatible Hyper PAV
If you want to disable Compatible Hyper PAV, enter "SETIOS HYPERPAV=NO".
Setting the MIH Timer Value
The recommended MIH timer value for XP1024/XP128/XP12000/XP10000 Compatible PAV operations is
30 seconds. The MIH timer values can be set in MVS/ESA, z/OS, or OS/390 either at IPL or after IPL.
To set the MIH timer value:
• At IPL – Use the MIH parameter in the IECIOSxx parmlib member to set the MIH timer value at IPL time.
• After IPL – Use the “SETIOS” System Command after IPL to change or set the MIH timer value.
Starting Compatible PAV
To access Compatible PAV:
1. Click the Mainframe tab, click the Mainframe Connection button ( ), and then click the Compatible
PAV tab. The Compatible PAV window is displayed.
Figure 6 Compatible PAV window
Compatible PAV Window
Use the CU# list to select a logical CU image in the connected XP1024/XP128/XP12000/XP10000. The
Compatible PAV window displays the LDEVs (3390 LVIs only) for the selected CU image.
NOTE: CU numbers included in the currently selected CU group is indicated. To indicate the CU numbers
included in another CU group, select the CU group which includes the CU number to be indicated in the
drop-down list to select CU groups located in the upper right part of the Storage Navigator main panel.
See the HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000 for the details of
CU group.