HP NonStop G-Series - Manual (Page 200)

Example: Line $ZZWAN.#SWAN2.1.0
Attributes
Line $ZZWAN
Service State
Displayed in the Attributes tab and Attributes dialog box only if the value is
something other than OK.
Values
Logical
Device Name
The name of the WAN device associated with the line.
Example: $TP6S1
If no device is configured, "FREE" is shown.
DLC Task Name
The name of the data link control (DLC) task associated with the line.
Format: adapter name.clip number.DLC line number
Example: $ZZWAN.#D08XE5.1.DLC0
DLC Task State
The state of the data link control (DLC) task associated with the line as known to
the operating system.
Values: Starting, Started, Stopped, Unknown, and Indeterminate (CLIP is
inaccessible).
Actions
External Loopback Test
Performs the external loopback firmware diagnostic test.
Start DLC Task
Starts the data link control (DLC) task associated with the SWAN Line. When the Start action
completes, the task is in the Started State.
Stop DLC Task
Stops the data link control (DLC) task associated with the SWAN Line. When the Start action
completes, the task is in the Stopped State. Device objects already using the task are not affected by
this action, but subsequent attempts to download tasks will fail.
SWAN Path
Attributes