Actions – HP NonStop G-Series User Manual
Page 216
Y Fabric Connection State
The connectivity status of the CLIM to the ServerNet
Y fabric. Possible values include:
Connected: The CLIM is connected to the
ServerNet Y fabric.
●
Cross-connected: The configured ServerNet Y
fabric port on the system is connected to the X
fabric port on the CLIM.
●
Not Connected: The CLIM is not connected to
the ServerNet Y fabric.
●
Not a CLIM: A device other than a CLIM is
connected to the ServerNet Y fabric.
●
Unknown: The system is unable to determine
the Y fabric connection state of the CLIM.
●
Physical
Part Number
The part number of the CLIM that was assigned in manufacturing. Use part number
for identifying and ordering CLIMs.
Type
The vendor hardware type of the CLIM.
Serial Number The serial number of the CLIM.
Actions
Delete
Deletes the CLIM object. When the Delete action completes successfully, the CLIM object no longer
exists in the configuration database of the system.
Responsive Test
Verifies that the CLIM is installed and responding. The CLIM must be in Started state before you
can perform this action.
Start
Puts the CLIM in a state to accept regular I/O commands. When the Start action completes
successfully, the CLIM is in the Started state.
Stop
Puts the CLIM in a state to disallow regular I/O commands. When the Stop action completes
successfully, the CLIM is in the Stopped state.