HP NonStop G-Series - Manual (Page 80)

UNI Management Entity VPI
The User-Network interface (UNI) management entity virtual path
identifier (VPI).
Value: 0 through 255
Maximum Number of VCIs
The maximum number of Virtual Circuit IDs (VCIs) that can be
active for permanent virtual circuits.
Value: 32 through 3072
UNI Version
The version of the User-Network Interface (UNI) supported by this
ATM line.
Maximum Number of VPIs
The maximum number of virtual path identifiers (VPIs) for
permanent virtual circuits.
Value: 0 through 256
ATM Address Registered The address that is registered for this ATM Line.
Device State
The state of the component as known to the operating system on the
server.
Values
Maximum Number of VCI Bits
The address width and the maximum number of Virtual Circuit ID
(VCI) bits that can be active.
Value: 0 through 16
UNI Management Entity VCI
The User-Network interface (UNI) management entity virtual
circuit identifier (VCI).
Value: 0 through 3071
Maximum Number of VPI Bits
The address width and the maximum number of Virtual Path ID
(VPI) bits that can be active.
Value: 0 through 8
Actions
None.
Battery
Attributes
Actions
The battery customer-replaceable unit (CRU), located in Nonstop S-series I/O enclosures, is an
assembly of 24 cells rated at 2.5 amp-hours per cell. The batteries are designed to handle occasional
power failures that might occur at typical computer sites. Each I/O enclosure contains two batteries.
Location in OSM Tree: System > Group > Module > Battery
Slot Location: In processor enclosures, battery CRUs are located in slots 23 and 28 (appearance
side).