Select print media, Tips for selecting and using print media, Set minimum margins – HP Officejet Pro L7480 All-in-One Printer User Manual
Page 22
NOTE:
Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see
To load an original on the scanner glass
1. Lift the scanner lid.
2. Load your original print side down in the right front corner of the glass.
TIP:
For more help on loading an original, refer to the engraved guides along
the edge of the glass.
3. Close the lid.
Select print media
The device is designed to work well with most types of office media. It is best to test a
variety of print media types before buying large quantities. Use HP media for optimum
print quality. Visit the HP Web site
about HP
media.
Tips for selecting and using print media
For the best results, observe the following guidelines.
•
Always use media that conforms to the device specifications. For more
information, see
Understand specifications for supported media
•
Load only one type of media at a time into a tray.
•
For Tray 1 and Tray 2, load media print-side down and aligned against the right
and back edges of the tray. Tray 2 is available with some models. For more
information, see
•
Tray 2 is designed to hold only plain paper.
•
Do not overload the trays. For more information, see
.
•
To prevent jams, poor print quality, and other printing problems, avoid the following
media:
•
Multipart forms
•
Media that is damaged, curled, or wrinkled
•
Media with cutouts or perforations
Chapter 3
18
Use the device