Solve copy problems, No copy came out – HP Officejet Pro L7480 All-in-One Printer User Manual
Page 79
Pages are skewing
•
Make sure the media loaded in the trays is aligned to the paper guides. If needed,
pull out the trays from the device and reload the media properly, making sure that
the paper guides are properly aligned.
•
Make sure the rear access panel or optional duplexer is properly installed.
•
Load media into the device only when it is not printing.
Multiple pages are being picked up
•
Fan the media before loading.
•
Make sure the paper guides are set to the correct markings in the tray for the
media size you are loading. Also make sure the guides are snug, but not tight,
against the stack.
•
Make sure the tray is not overloaded with paper.
•
When using thin special media, make sure that the tray is completely loaded. If you
are using special media that is only available in small quantities, try placing the
special media on top of other paper of the same size to help fill the tray. (Some
media is picked up more easily if the tray is full.)
•
If you are using thick special media (such as brochure paper), load media so that
the tray is between 1/4 and 3/4 full. If necessary, place the media on top
of other paper of the same size so that the stack height is within this range.
•
When reinserting Tray 2 (optional) into the device, do so gently. Forceful insertion
with a full stack of paper may cause sheets to slide up within the device, causing
the device to jam or pick multiple sheets at one time.
•
Use HP media for optimum performance and efficiency.
Solve copy problems
If the following topics do not help, see
support.
No copy came out
•
Check the power
Make sure that the power cord is securely connected, and the device turned on.
•
Check the status of the device
•
The device might be busy with another job. Check the control-panel display for
information about the status of jobs. Wait for any job that is processing to finish.
•
The device might be jammed. Check for jams. See
.
•
Check the trays
Make sure that media is loaded. See
for more information.
Solve copy problems
75