Load tray 2 – HP LaserJet Enterprise 500 Color MFP M575 User Manual
Page 51
Load Tray 2
This tray holds up to 250 sheets of 75 g/m
2
(20 lb) paper. If the paper is heavier, the tray does not
hold as many sheets. Do not overfill the tray.
CAUTION:
Do not print envelopes, labels, postcards, or unsupported sizes of paper from Tray 2.
Print these types of paper only from Tray 1.
1.
Slide open the tray.
NOTE:
Do not open the tray while it is in
use.
2.
Adjust the paper-length and paper-width
guides by squeezing the adjustment latch and
sliding the guides to the size of the paper
being used.
3.
Load paper into the tray face-up. Check the
paper to verify the guides lightly touch the
stack, but do not bend it.
NOTE:
To prevent jams, do not overfill the
tray. Be sure the top of the stack is below the
tray full indicator.
NOTE:
If the tray is not adjusted correctly,
an error message might display during printing
or the paper might jam.
ENWW
Tray 2
37