Removing a component group, Renaming a component group, 18 renaming a component group – HP SAN User Manual
Page 18: Removing component group
Removing a component group
To remove a component group from the SAN, complete the following steps:
1.
Select the component group name you want to remove from the SAN explorer area.
2.
Right-click and select Remove from the pop-up menu, as shown in
.
The component group is removed from the SAN.
CAUTION:
Removing a component group removes all the switches attached to that group.
Figure 7 Removing component group
.
Renaming a component group
To rename a component group, complete the following steps:
1.
Select the component group name you want to rename from the SAN explorer area.
2.
Right-click and select Rename from the pop-up menu, as shown in
3.
Enter the component group name in the Component Group Name box in the main display area.
4.
Click Rename.
The component group is renamed.
Using SAN Visibility
18