Disks:loading, Loading disks, Start with – HP Optical Jukeboxes User Manual
Page 50: Press, Figure 3-3 loading a disk, Loading a disk into the jukebox -10, Figure 3-3 . loading a disk -10, Loading a disk into the jukebox
3-10
Chapter 3
Operating the Jukebox
Loading a Disk into the Jukebox
Loading a Disk into the Jukebox
NOTE
Label all disks before loading them into the jukebox. (See “Labeling an Optical Disk
Cartridge” in Chapter 2 for instructions.)
Some software packages require that you load and eject disks by using instructions
in the software. If you use a software package to manage files in the jukebox, check
the software documentation before proceeding with these steps.
Start with READY, LOAD * or EJECT * in the display.
1. Press
LOAD
on the jukebox control panel. (If none of these messages displays,
press
CANCEL
until READY displays.)
Figure 3-3
Loading a Disk
2. When the mailslot opens, insert a disk into the mailslot with Side A of the disk
facing up. The shutter end of the disk goes in the mailslot first.
When the disk is inserted, it is automatically pulled into the mailslot. An
incorrectly inserted disk is rejected, CART IN WRONG displays briefly, and
then LOAD SLOT # displays. (“#” is flashing and is the number of the first
available storage slot in the jukebox.)