HP 3PAR Service Processors - Manual (Page 13)

Default SP User Accounts
During the SP’s MOB operation, the following SP user accounts are created:
•
3parcust is the default customer account. This account is not used by HP personnel and can
be modified by the user. This account can be used to create new local SP users and to access
SPOCC. The 3parcust password should be changed by the customer.
•
setupusr is used only for the initial system setup process to access the SP from the setup wizards.
After installation, the setupusr account password should be changed.
•
spvar is used only by HP personnel and authorized service providers to perform service and
diagnostic functions on the system. This account can be used to access SPOCC and the
SPMAINT utility (via SSH). The spvar password should be changed by the customer and stored
so that it can be shared with on-site HP or authorized service personnel during maintenance
activities (and changed again afterwards).
Default CLI User Accounts
During the HP 3PAR storage system’s MOB operation, the following HP 3PAR CLI user accounts
are created:
•
3paradm is a user account with Super rights. This user account is not used by HP personnel
and you can modify or delete this user account. Use the 3paradm user account to create new
CLI users. You should change the password of this user.
•
3parcim is a user account with Browse rights. This user account is reserved for use by the HP
3PAR administration tools. The 3parcim user account and password must not be modified or
deleted if you intend to use CIM. If CIM will never be used, then the account may be modified
or deleted.
•
3parbrowse is a user account with Browse rights. No HP personnel or service providers have
access to this user account. The password is randomly created and is unknown to anyone.
This user account is not used by HP personnel and you can modify or delete this user account.
•
3paredit is a user account with Edit rights. No HP personnel or service providers have access
to this user account. The password is randomly created and is unknown to anyone. This user
account is not used by HP personnel and you can modify or delete this user account.
•
3parsvc is a user account with Super rights. This Super user account is used by the HP 3PAR
Service Processor (SP) to monitor the HP 3PAR storage system. The 3parsvc user account should
not be removed. If the SP is being used to monitor the storage server, the SP resets the default
password to a randomized value. Changing the password prevents the SP from performing
monitoring operations. If the SP is not being used for monitoring and is only used for
maintenance activities, the password can be changed. When a maintenance activity takes
place, the password for 3parsvc should be set to a defined value; after the maintenance, the
SP changes the password to a randomized value again. Once the maintenance is complete,
the password can again be changed.
•
3parservice is a user account with Super rights. This Super user account is used by HP personnel
and authorized service providers to perform service and diagnostic functions on the system
through the interactive CLI. The 3parservice user account should not be removed. The password
can be modified by the system administrator. During SP maintenance activities, the password
may be reset by the system to allow service to proceed. Once the maintenance is complete,
the password can again be changed.
Default User Accounts 13