Notes – HP StorageWorks XP Remote Web Console Software User Manual

Page 52

Advertising
background image

52

XP Performance Control Export Tool

For a complete list of files to be saved by the Export Tool, see

Files to be exported

” on page 32.

Notes

When an internal error shown in

Table 19

occurs during export processing, the exclamation mark (!)

appears and retries export processing. By default, the Export Tool can retry processing up to three

times. If export processing does not finish after three retries or if an internal error occurs other than

those in

Table 19

, the Export Tool does not retry the processing. In this case, you must quit the

command prompt and run the Export Tool again. However, you can change the maximum number of

retries using the retry subcommand. For detailed information, see ”

The retry subcommand

” on

page 56.
If the error persists, contact your HP account support representative.

If you specify the nocompress operand for the option subcommand, the Export Tool saves files in

CSV format instead of ZIP format (for detailed information, see ”

The option subcommand

” on

page 73). Note that, when files are saved in CSV format instead of ZIP format, the file-saving process

would take longer and the resulting files would be larger.

Files the Export Tool saves are often very large. The total file size for all files can be as large as

approximately 2 GB. For this reason, the export process might take a long time (see

Table 20

). To

export statistics spanning a long time period, HP recommends using the Export Tool more than one

time, rather than using the tool only one time to export the whole statistics. For example, to export

statistics spanning 24 hours, you could run the Export Tool eight times; each time the Export Tool runs,

the tool should export statistics spanning three hours.

Table 19

Errors for which the Export Tool retries processing

Error message ID

Cause of error

0001 4001

An error occurred.

0001 5400

Since the server is busy, monitoring data cannot be obtained.

0001 5508

An administrator is changing a system environment file.

0002 2016

Array is refreshing, or user-specified settings are being registered.

0002 5510

Array is refreshing, or another user is changing configuration.

0002 6502

Now processing.

0002 9000

Another user has lock.

0003 2016

SNMP or SVP has lock.

0003 2033

Server is not ready yet, or internal processing is being executed.

0003 3006

An error occurred.

0405 8003

Array status is invalid.

5205 2003

An internal process is being executed, or maintenance is in progress.

5205 2033

Server is now gathering the latest data.

5305 2033

Server is now gathering the latest data.

5305 8002

Array status is invalid.

Table 20

Estimate examples of time required for exporting files

Operand for

the group

subcommand

Estimated time

Remarks

Port

5 minutes

Assumes the Export Tool should save statistics about 128 ports within a

24-hour period.

PortWWN

5 minutes

Assumes the Export Tool should save statistics about 128 ports within a

24-hour period.

Advertising