HP StorageWorks XP Remote Web Console Software - Manual (Page 63)

XP Performance Control user guide 63
Use this operand to export statistics about parity, external LU, or V-VOL groups, which appear in the
LDEV tab of the XP Auto LUN pane. When statistics are exported to a ZIP file, the file name is
PG_dat.ZIP
. For details about statistics exported by this operand, see Table 4 .
When specifying the parity-group-id, exg-id, or V-VOL-group-id variables, you can
narrow the range of parity, external LU, or V-VOL groups whose monitoring data is exported.
parity-group-id
is a parity group ID. exg-id is an ID of an external LU group.
V-VOL-group-id
is a V-VOL group ID. The colon (:) indicates a range. For example, 1-1:1-5
indicates parity groups from 1-1 to 1-5. E1-1:E1-5 indicates external volume groups from E1-1 to
E1-5. V1-1:V5-1 indicates V-VOL groups from V1-1 to V5-1.
Ensure that the parity-group-id, exg-id, or V-VOL-group-id value on the left of the colon is
smaller than the parity-group-id, exg-id, or V-VOL-group-id value on the right of the
colon. For example, you can specify PG 1-1:1-5, but you cannot specify PG 1-5:1-1. Also, you
can specify PG 1-5:2-1, but you cannot specify PG 2-1:1-5.
If neither of parity-group-id, exg-id, nor V-VOL-group-id is specified, monitoring data for
all parity, external LU, and V-VOL groups is exported.
LDEV
[[parity-group-id|V-VOL-group-id|exg-id]:
[parity-group-id|V-VOL-group-id|exg-id]][
...]
Use this operand to export statistics about logical volumes, which appear in the LDEV tab of the Auto
LUN XP pane. When statistics are exported to a ZIP file, multiple ZIP files with names beginning with
LDEV_
are output. For more information about statistics exported by this operand, see Table 6 .
When specifying the parity-group-id, exg-id, or V-VOL-group-id variable, you can narrow
the range of parity, external LU, or V-VOL groups whose monitoring data is exported.
parity-group-id
is a parity group ID. exg-id is an ID of an external LU group.
V-VOL-group-id
is a V-VOL group ID. The colon (:) indicates a range. For example, 1-1:1-5
indicates parity groups from 1-1 to 1-5. E1-1:E1-5 indicates external LU groups from E1-1 to E1-5.
V1-1:V5-1
indicates V-VOL groups from V1-1:V5-1.
Ensure that the parity-group-id, exg-id, or V-VOL-group-id value on the left of the colon is
smaller than the parity-group-id, exg-id, or V-VOL-group-id value on the right of the colon.
For example, you can specify LDEV 1-1:1-5, but you cannot specify LDEV 1-5:1-1. Also, you
can specify LDEV 1-5:2-1, but you cannot specify LDEV 2-1:1-5.
If neither of parity-group-id, exg-id, or V-VOL-group-id is specified, monitoring data for all
logical volumes (including external LUs and V-VOL groups) is exported.
Port
[[port-name]:[port-name]][...]
Use this operand to export port statistics, which appear in the Port-LUN tab of the XP Auto LUN pane.
When statistics are exported in a ZIP file, the file name is
Port_dat.ZIP
. For details about statistics
exported by this operand, see Table 6 .
When specifying the port-name variable, you can narrow the range of ports whose monitoring data
is exported. port-name is a port name. The colon (:) indicates a range. For example,
CL3-a:CL3-c
indicates ports from CL3-a to CL3-c.
Ensure that the port-name value on the left of the colon is smaller than the port-name value on the
right of the colon. Note that the smallest port-name value is CL1-A and the largest port-name
value is CL4-r. The following formula illustrates which value is smaller than which value:
CL1-A < CL1-B < … < CL2-A < CL2-B < … < CL3-a < CL3-b < … < CL4-a < … < CL4-r
For example, you can specify Port CL1-C:CL2-A, but you cannot specify Port CL2-A:CL1-C.
Also, you can specify Port CL3-a:CL3-c, but you cannot specify Port CL3-c:CL3-a.
If port-name is not specified, monitoring data for all ports is exported.
PortWWN
[[port-name]:[port-name]][...]
Use this operand to export statistics about host bus adapters (WWNs) connected to ports, which
appear in the Port-LUN tab of the XP Auto LUN pane. When statistics are exported in a ZIP file, the file
name is
PortWWN_dat.ZIP
. For details about statistics exported by this operand, see Table 7 .
When specifying the port-name variable, you can narrow the range of ports whose monitoring data
is exported. port-name is a port name. The colon (:) indicates a range. For example,
CL3-a:CL3-c
indicates ports from CL3-a to CL3-c.