Scan to email – HP TopShot LaserJet Pro M275 MFP User Manual
Page 129
Scan to email
Use the product control panel to scan a file directly to an email address. The scanned file is sent to the
address as an email message attachment.
NOTE:
In order to use this feature, the product must be connected to a network and the scan feature
must be configured using the HP Embedded Web Server.
1.
Raise the camera arm to the fully open
position.
2.
Place the document or object on the capture
stage, facing up. Align the top left corner of
documents with the ridges along the right and
rear edges of the capture stage.
3.
From the Home screen, touch the
Scan
button.
4.
Touch the
Scan to E-mail
item.
5.
Touch the
Send to E-mail
item.
6.
Select the
From
address that you want to use.
This is also known as an “outgoing email
profile.”
NOTE:
If the PIN feature has been set up,
enter the PIN and touch the
OK
button.
However, a PIN is not required to use this
feature.
ENWW
Scan to email
119