HP TopShot LaserJet Pro M275 MFP - Manual (Page 143)

Print when a print cartridge or imaging drum is at
estimated end of life
<Supply> Low message—where <Supply> is the color print cartridge or the imaging drum: The
product indicates when a supply level is low. Actual life remaining may vary. Consider having a
replacement available to install when print quality is no longer acceptable. The supply does not need to
be replaced now.
<Supply> Very Low message—where <Supply> is either the color print cartridge or imaging drum
or a combination of multiple print cartridges and/or the imaging drum: The product indicates when a
supply level is very low. Actual supply life remaining may vary. Consider having a replacement
available to install when print quality is no longer acceptable. The supply does not need to be replaced
now unless the print quality is no longer acceptable.
Once an HP print cartridge has reached “very low”, HP’s Premium Protection Warranty on that supply
has ended.
The imaging drum installed in this product is covered by the product warranty. Replacement imaging
drums have a one-year limited warranty from the date of installation. The imaging drum installation
date displays on the supplies status page.
You can change the way the product reacts when supplies reach the Very Low state. You do not have
to re-establish these settings when you install a new print cartridge or imaging drum.
1. From the Home screen on the control panel, touch the Setup button.
2. Open the following menus:
● System Setup
● Supply Settings
● Black Cartridge , Color Cartridges , or Imaging Drum
● Very Low Setting
3. Select one of the following options:
● Select the Continue option to set the product to alert you that the print cartridge or imaging
drum is very low, but to continue printing.
When the Very Low Setting menu is set to the Continue option, the product automatically
continues printing when a supply reaches the recommended replacement level. The
<Supply> Very Low message appears while a supply is being used in continue at very
low mode.
Once an HP supply has reached very low, HP's Premium Protection Warranty on that supply
has ended. All print defects or cartridge failures incurred when an HP supply is used in
continue at very low mode will not be considered to be defects in materials or workmanship
in the supply under the HP Print Cartridge Warranty Statement.
● Select the Stop option to set the product to stop printing until you replace the print cartridge
or imaging drum.
ENWW Print when a print cartridge or imaging drum is at estimated end of life 133