Solve fax problems, The fax test failed – HP Officejet 6700 Premium e-All-in-One Printer - H711n User Manual

Page 106

Advertising
background image

Unclear text
Try adjusting the settings. Make sure that the resolution and color settings are
correct.

Size is reduced
The HP software settings might be set to reduce the scanned image. See the HP
printer software Help for more information about changing the settings.

Solve fax problems

This section contains fax setup troubleshooting information for the printer. If the printer
is not set up correctly for faxing, you might experience problems when sending faxes,
receiving faxes, or both.
If you are having faxing problems, you can print a fax test report to check the status of
the printer. The test fails if the printer is not set up correctly for faxing. Perform this test
after you have completed setting up the printer for faxing. For more information, see
Test fax setup.
If the test fails, review the report for information on how to fix any problems found. For
more information, see The fax test failed.

TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.

The fax test failed

The display always shows Phone Off Hook

The printer is having problems sending and receiving faxes

The printer is having problems sending a manual fax

The printer cannot receive faxes, but can send faxes

The printer cannot send faxes, but can receive faxes

Fax tones are recorded on my answering machine

The phone cord that came with my printer is not long enough

Color faxes do not print

The computer cannot receive faxes (Fax to PC and Fax to Mac)

The fax test failed

If you ran a fax test and the test failed, review the report for basic information about the
error. For more detailed information, check the report to see which part of the test
failed, and then review the appropriate topic in this section for solutions to try.
This section contains the following topics:

The "Fax Hardware Test" failed

The "Fax Connected to Active Telephone Wall Jack" test failed

The "Phone Cord Connected to Correct Port on Fax" test failed

The "Using Correct Type of Phone Cord with Fax" test failed

The "Dial Tone Detection" test failed

The "Fax Line Condition" test failed

Chapter 8

102

Solve a problem

Advertising