HP Officejet v40 All-in-One Printer - Manual (Page 13)

Chapter 4—Load paper or transparency film, or load originals 9
HP OfficeJet V Series
5HYLHZ WLSV IRU ORDGLQJ VSHFLILF W\SHV RI SDSHU
The following table provides guidelines for loading certain types of paper and film. For
best results, adjust the paper settings each time you change paper types and paper sizes.
For more information, see “Set the paper type” and “Change the paper size.”.
Paper Tips
HP papers • HP Premium Inkjet Paper: Locate the gray arrow on the
nonprinting side of the paper, and insert paper with the arrow
side facing up.
• HP Premium or Premium Plus Photo Paper: Load the glossy
(print) side down. Always load at least five sheets of regular
paper in the input tray first, and place the photo paper on top of
the regular paper.
• HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip, with arrows and the HP logo, is on top
and is going into the tray first.
• HP Iron-On T-shirt Transfers: Flatten the transfer sheet
completely before using it; do not load curled sheets. (To prevent
curling, keep transfer sheets sealed in the original package until
just before using.) Manually feed one sheet at a time, with the
unprinted side facing down (the blue stripe faces up).
• HP Greeting Card, Glossy Greeting Card, or Textured Greeting
Card paper: Insert a small stack of HP Greeting Card Paper with
the print-side down into the input tray until it stops.
• HP Restickable Inkjet Stickers: Place the sheets in the input tray,
print-side (sticker-side) down.
Legal-size paper Even though the paper-length adjuster is fully extended, make sure
that the input tray itself is pushed all the way in.
Labels
(only works with
printing) • Always use letter- or A4-size label sheets designed for use with
HP inkjet products (like Avery Inkjet Labels), and make sure that
the labels are not over two years old.
• Fan the stack of labels to make sure none of the pages are
sticking together.
• Place a stack of label sheets on top of standard paper in the input
tray, print-side down. Do not insert labels one sheet at a time.
Postcards
(only works with
printing) Insert a stack of postcards with the print-side down into the input
tray until it stops. Line the postcards up on the right side of the input
tray, slide the width adjuster up against the left side of the cards, and
slide the length adjuster in until it stops.