HP LaserJet Pro 300 Color MFP M375 - Manual (Page 274)

Clear jams in the fuser area
1. Open the rear door.
CAUTION: The fuser, located in the back of
the product, is hot. Wait for the fuser to cool
before continuing.
2. If necessary, push the guide (callout 1) and
remove any visible paper (callout 2) from the
bottom of the delivery area.
NOTE: If the sheet tears, make sure that all
fragments are removed before you resume
printing. Do not use sharp objects to remove
fragments.
3. Close the rear door.
258 Chapter 14 Solve problems ENWW