HP Officejet 7110 Wide Format ePrinter - H812a - Manual (Page 107)

Light description/Light pattern Explanation and recommended action
The Power light blinks. The printer is turning on or off, or is
processing a print job.
● No action is required.
The printer is pausing for the ink to dry.
● Wait for the ink to dry.
The Power light is on, and the Alert light and the Resume light blink. Print paper is jammed in the printer.
● Remove all paper from the output
tray. Locate and clear the jam. For
more information, see Clear jams
on page 90.
The paper width setting does not match
the paper loaded.
● Change the paper setting in the print
driver to match the paper loaded.
For more information, see Print on
special and custom-sized paper
on page 28
The printer is out of paper.
● Load paper and press the
(Resume) button.
The printer carriage has stalled.
● Open the top cover and remove any
obstructions (such as jammed
paper).
● Press the (Resume) button to
continue printing.
● If the error persists, turn the printer
off, and then on again.
The Power light is on and the Alert light blinks. A front cover, cleanout, duplexer, or jam
door is not closed completely.
● Make sure all covers are completely
closed.
94 Chapter 5 Solve a problem ENWW