HP Insight Management Agents - Manual (Page 80)

◦ Not Connected - Indicates that the fibre channel port is not connected or the device to
which it is connected is powered down.
◦ Unknown - Indicates the Storage Agents cannot determine the status of the host controller.
•
Serial Number displays the serial number of the host controller. The serial number is not
available for all host controllers. In this case N/A will be displayed.
•
Location displays the physical slot information where the host controller resides in the system.
For example, if this value is three, the controller is located in slot three of your computer.
•
World Wide Port Name displays the unique Fibre Channel port name for this controller.
•
World Wide Node Name displays the unique Fibre Channel node name for this controller.
•
Firmware Version indicates the version of firmware for this controller.
•
Option ROM Version indicates the version of the option ROM for this controller.
•
Storage Systems displays all of the attached storage systems. Select a storage system entry to
display the related Storage System Information.
•
IO Slot displays the storage system IO slot number that is connected to the host controller.
•
Tape Controllers displays all of the Fibre Channel tape controllers attached to the host controller.
Select a tape controller entry to display the related Tape Controller Information.
•
Switches displays all of the supported fibre channel switches attached to the host controller.
Select a switch to display the related Fibre Channel Switch Information.
Array Controller Connections
The following information is displayed for the external storage connections to the host array
controller.
•
Status displays the status for this controller. The following values are valid:
OK - The array controller is operating properly. ◦
◦ General Failure - The array controller has failed.
◦ Cable Problem - The array controller has a cable problem. Check all cables to the
controller.
◦ Powered Off - The array controller does not have power. Replace the controller and
restore power to the controller's slot.
◦ Unknown - Indicates that the Storage Agents are unable to determine the status of the
controller. You may need to upgrade the Storage Agents.
•
Firmware Version lists the firmware version of the array controller. This value can be used to
help identify a particular revision of the controller.
•
Location displays the physical slot information where the array controller resides in the system.
For example, if this value is three, the controller is located in slot three of your computer.
•
Serial Number displays the serial number of the array controller. The serial number is not
available for all host controllers. In this case N/A will be displayed.
•
Storage System displays the attached storage system. Select the storage system entry to display
the related Storage System Information.
80 Agent information