HP LaserJet M2727 Multifunction Printer series - Manual (Page 199)

Clear jams from the print-cartridge area
CAUTION: Do not use sharp objects, such as tweezers or needle-nose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.
When removing jammed media, pull the jammed media straight away from the product. Pulling jammed
media out of the product at an angle can damage the product.
1. Open the print-cartridge door, and remove the print cartridge.
CAUTION: To prevent damage to the print cartridge, minimize its exposure to direct light.
2. On the product, open the rear output door, and then rotate the green pressure-release levers
downward.
3. With both hands, grasp the side of the media that is most visible (this includes the middle), and
carefully pull it free from the product.
4. Replace the print cartridge and close the print-cartridge door.
5. Close the rear output door.
ENWW Clear jams 187