Viewing remote copy groups, Viewing remote copy virtual volumes – HP 3PAR Operating System Software User Manual
Page 248
“Viewing System Alerts” (page 57)
Viewing Remote Copy Groups
A Remote Copy group is a group of virtual volumes on the same storage server that are logically
related, and on which Remote Copy operations are performed.
To view Remote Copy groups:
1.
In the Manager Pane, click Remote Copy.
2.
In the Management Tree, click Groups under the Remote Copy Configuration node for the
Remote Copy configuration you wish to view.
Information about Remote Copy groups appears on three panes in the Management Window:
•
The left pane displays a graphical representation of the selected Remote Copy configuration.
The image includes the type of Remote Copy relationship (Remote Copy over IP or Remote
Copy over Fibre Channel) between the servers in the Remote Copy configuration, the direction
of replication (indicated with an arrow) between the servers, the synchronization and Remote
Copy status of the Remote Copy groups, and the number of volumes being replicated. This
image is updated for the Remote Copy group selected from the upper right pane.
•
The upper right pane displays a table of the Remote Copy groups in the selected Remote Copy
configuration.
•
The lower right pane displays a table of the virtual volume(s) belonging to the selected Remote
Copy group from the upper right pane. The table can be filtered to display information about
virtual volume Pairs, the Source virtual volume, or the Backup virtual volume.
NOTE:
You can additionally view only synchronous Remote Copy groups or asynchronous
periodic Remote Copy groups by clicking either Synchronous or Periodic, respectively, under the
Groups node in the Management Tree.
See also:
“Viewing Configured Remote Copy Systems” (page 246)
Viewing Remote Copy Virtual Volumes
To view Remote Copy virtual volumes:
1.
In the Manager Pane, click Remote Copy.
2.
In the Management Tree, click Virtual Volumes under the Remote Copy Configuration node
for the Remote Copy volumes you wish to view.
Information about Remote Copy virtual volumes appears on two panes in the Management Window:
•
All virtual volumes associated with the Remote Copy configuration you selected are displayed
in a table in the upper pane of the Management Window. The table displays Remote Copy
information such as where the volumes are exported, the volume's Remote Copy status (if the
volume is a primary or secondary volume), and to which Remote Copy group the volume
belongs.
•
The lower pane displays details about a single volume selected from the upper pane. The
detailed information is displayed on eight tabs, Summary, Settings, Advanced, Logical Disks,
SCSI Reservations, VLUNs, Layout, and Alerts. See
“Viewing the Virtual Volumes Tab” (page 173)
.
See also:
248 Viewing Remote Copy Information