Alcatel Carrier Internetworking Solutions 5580 - Manual (Page 6)

6 Alcatel-Lucent 5580 Home Network Manager
How the Alcatel-Lucent 5580 HNM Works
WT-140: NAS
Data Model
TR-094: HN Multiservice
Delivery Framework
TR-110: VoIP
Reference Models
TR-122: Voice ATA
Requirements
TR-068: WT-124,
RG Requirements
TR-106: Common Data
Model Template
TR-064: LAN-side
CPE Management TR-098, TR-133:
QoS Extensions
WT-135: STB
Object Model
TR-069: WAN-side
CPE Management
WT-121, WT-123: TR-069
Implementation and Interoperability
Supported in HNM 2.3
TR-104: VoIP
Object Model
TR-111: Remote Management of
Home Devices (TR-069 pass-thru)
IP-STB
Games
Console
Home Storage
Server
Residential
Gateway (RG)
Auto-Configuration
Server (ACS)
VoIP
Call Center
OSS/BSS
Policy
WT-131, WT-132 ACS
Northbound Interface
Figure 2. DSL Forum Standards for CPE Management
Remote Device Management Based on DSL Forum TR-069
The Alcatel-Lucent 5580 HNM implements the WAN-side management
protocol described in the DSL Forum TR-069 standard. TR-069 specifies
a protocol stack, connectivity and object model for the management of modems
and residential gateways. The TR-069 standard has been extended with TR-111
to allow management of devices behind a NAT residential gateway. Connectivity
between the Alcatel-Lucent 5580 HNM and home devices is established based
on HTTP and IP protocols, making the link-layer independent and suitable for
any service provider (access provider, Internet service provider [ISP] or appli -
cation provider).
The TR-069 protocol is CPE-driven, as the CPE connects periodically to the
management system. The CPE also contacts the Alcatel-Lucent 5580 HNM
on specific events such as reboot and IP address change. This communication
is complemented with a connection request mechanism, permitting the
Alcatel-Lucent 5580 HNM to contact the CPE at any time.