About washer features – GE GTWS8655DMC User Manual

Page 8

Advertising
background image

8

About washer features.

Bulk Detergent Tank

The bulk detergent tank holds over a gallon (140

ounces or 4100 ml) of liquid bulk detergent. After

filling the tank, press the Detergent Tank On button

to turn on its light and designate bulk (rather than

manual) detergent dispense.
The Tank Levels lights (1-5) indicate how much

detergent is left. An empty tank is shown by a single

red light. A full (or nearly full) tank is shown by 5

lights.
NOTE: The initial fill of the bulk tank will require 50

ounces of detergent to prime the system. If you

press the Start button when the tank is empty, the

Detergent Tank On button and red empty Tank

Level light will blink. The machine will not start. A

beep will also sound if Variable Signal is on. To start

the machine, you must add more detergent to the

tank or turn off the bulk detergent tank.

The Detergent Cup Amount lights indicate if a Low,

Medium, or High amount will be dispensed.
See the Bulk Tank Special Functions Option 1: Set

Concentration Settings on page 10 to understand

how the Low, Medium, and High amounts are

established.
Detergent will be automatically dispensed at the

optimum time at the beginning of each fill cycle.

Bulk Detergent Tank

Single Use Wash Detergent Dispenser

If you prefer to manually add either powder or liquid

detergent to the next wash cycle, pour it in the left

front opening and make sure the Tank On light is

off (press button if light is on). Most detergent will

immediately enter the tub. The washer will flush

water through this opening just prior to the fill cycle

to add any detergent that did not fall into the tub.

DO NOT put detergent packets in

dispenser compartments. Laundry

detergent packets should only be

added directly to the wash tub following the

manufacturer’s directions.

Single Wash Detergent Dispenser

Set the Bulk Detergent Cup Amount Preference

When the Detergent Tank On light is on, pressing the Detergent Cup Amount button will set the Detergent

Cup Amount lights (1, 2, or 3).
Level 1 will distribute the standard amount minus 25%.
Level 2 will distribute the standard amount.
Level 3 will distribute the standard amount plus 25%.
Examples:
Factory default standard amount is 1.5 oz (44 ml) (Concentration Setting 15).

If Detergent Cup Amount shows 3 lights then 1.9 oz (55 ml) will be dispensed.

If Detergent Cup Amount shows 2 lights then 1.5 oz (44 ml) will be dispensed.

If Detergent Cup Amount shows 1 light then 1.1 oz (33 ml) will be dispensed.

NOTE: Each cycle knob position defaults to a different Detergent Cup Amount (including 0 if no

detergent is used). If you change the Soil setting, the Detergent Cup Amount may change. You can

then manually change the Detergent Cup Amount, but your change will not be saved when you leave

this knob position or if you set a My Settings.

15

1.9 oz.
1.5 oz.
1.1 oz.

Concentration

Setting

3 lights:
2 lights:
1 light:

DO NOT put detergent

packets in dispenser

compartments.

Laundry detergent packets

should only be added directly

to the wash tub following the

manufacturer’s directions.

Advertising
This manual is related to the following products: