GE CT918STSS - Manual (Page 20)

20
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features and how
you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s
memory until the steps are repeated.
When the display shows your choice, press the
Start pad. The special features will remain in memory after a power failure,
except for the Sabbath feature, which will have to be reset.
12-Hour Shutoff
With this feature, should you forget and leave
the oven on, the control will automatically
turn off the oven after 12 hours during baking
functions
or after 3 hours during a broil function.
If you wish to turn OFF this feature, follow the
steps below.
Press the Bake and Broil Hi/Lo pads (on
double oven models, use the upper oven
controls) at the same time for 3 seconds,
until the display shows SF.
Press the Delay Start pad until no shdn
(no shutoff) appears in the display.
Press the Start pad to activate the no
shutoff and leave the control set in this
special features mode.
NOTE: On double oven models, this activates
this special feature for both ovens.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display, follow
the steps below.
Press the Bake and Broil Hi/Lo pads (on
double oven models, use the upper oven
controls) at the same time for 3 seconds,
until the display shows SF.
Press the Clock pad once. The display will
show 12 hr. If this is the choice you want,
press the Start pad.
Press the Clock pad again to change to
the 24-hour military time clock. The display
will show 24 hr. If this is the choice you
want, press the Start pad.
Press the Clock pad again to black out the
clock display. The display will show OFF. If
this is the choice you want, press the Start
pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Press the Bake and Broil Hi/Lo pads (on
double oven models, use the upper oven
controls) at the same time for 3 seconds,
until the display shows SF.
Press the Broil Hi/Lo and Cooking Time
pads at the same time. The display will
show F (Fahrenheit).
Press the Broil Hi/Lo and Cooking Time
pads again at the same time. The display
will show C (Celsius).
Press the Start pad.
NOTE: On double oven models, the new setting
will be displayed for both ovens.
+
+
+
+