Aastra Telecom M6310 User Manual
Page 14
Time and Date
To set the time and date on your M6310:
1.
Press
b
.
2.
Press
@
until
Time and Date Set?
is shown on the display.
3.
Press
a
.
4.
Enter the date using the format shown on the display.
5.
Enter the current time based upon the 24 hour clock.
6.
Press
a
to save the new time and date settings.
7.
Press
b
or
r
to exit programming mode.
To select the time and date display format:
1.
Press
b
.
2.
Press
@
until
Time and Date Format?
is shown on the
display.
3.
Press
a
.
4.
Press
@
until the desired format is shown on the display.
5.
Press
a
to save the new format setting.
6.
Press
b
or
r
to exit programming mode.
Call Timer
The Call Timer uses the display to show the time elapsed since the start
of a normal call (the timer appears on the display 5 seconds after the
call starts and remains on the display 5 seconds after you end the call).
Follow the instructions below to enable the Call Timer.
To enable the Call Timer:
1.
Press
b
.
2.
Press
@
until
Call Timer?
is shown on the display.
3.
Press
a
.
4.
Press
@
to enable or disable the Call Timer.
5.
Press
a
to save the new setting.
6.
Press
b
or
r
to exit programming mode.
12
Setting up local features: continued
6310 E UG2.qxd 1/24/05 3:49 PM Page 12