Aastra Telecom M6310 - Manual (Page 17)

Setting up local features: continued
15
Memory Number
The Memory Number feature allows you to program up to five
telephone numbers which can be recalled and dialed quickly and easily.
Note that the
Memory? option does not appear on the Program menu
when C.O. (Network) Features are enabled.
To program a number into memory:
1.
Press b .
2. Press @ until Memory? is shown on the display.
3. Press a .
4. Press @ until the desired memory location is shown on the
display (M1, M2, M3, M4 or M5). (If a number has already
been stored, it is also shown on the display).
5. Enter the number you wish to store.
6. Press a to save the new setting.
7. Press b or r to exit programming mode.
To make a call using Memory Number:
1.
Press d until the stored number you wish to call is shown on
the display (M1, M2, M3, M4 or M5).
2. Pickup the handset or press Y .
Pause
In order to make certain types of calls, you are sometimes required to
pause a moment during dialing. When storing this type of telephone
number using Memory Number or Speed Call, the required pause can be
inserted into the sequence of digits (or dial string) by using the Pause
key.
To insert a pause into the dial string:
1.
Press e at the appropriate place when entering the number.
For example, to enter a pause when accessing voice mail, the sam-
ple dial string shown below can be entered:
8088e4321:
6310 E UG2.qxd 1/24/05 3:49 PM Page 15