Aastra Telecom M6310 - Manual (Page 31)

29
Approval Requirements
Permitted Connections
This telephone, with its associated
power supply connector, may
only be connected to a Centrex
telephone system using a socket
provided by your system
administrator.
Only one terminal with its
associated power supply may be
connected to the telephone
socket.
Non-permitted Connections
This telephone must not be
connected to the Public Switched
Telephone Network.
Power Failure
In the event of a local power
failure, calls can be made using
the handset, incoming ringing
may be at a reduced level and
special features such as the
display and handsfree operation
will not function.
Safety Requirements
Power Supply
The telephone must be installed
near an electrical outlet which
should be easily accessible.
Caution Hazardous Voltages
When the terminal is connected
to the telephone network all of
the interconnection points are at
Telephone Network Voltage
(TNV).
The telephone and any acces-
sories must be assembled and
connected in accordance with
the manufacturer’s instructions
in the user guide before the
equipment is plugged into the
telephone line socket.
CE Marking
This equipment complies with
the requirements of the EMC Directive
89/336/EEC for Electromagnetic
Compatibility and the LVD Directive
72/23/EEC for Electrical Safety
as amended by Directive 93/68/EEC.
Figure 2 – European Wall jack/AC adaptor connections
V
U
Y
Z
X
W
6310 E UG2.qxd 1/24/05 4:35 PM Page 29