GE ZIRP360NXLH - Manual (Page 19)

STEP 9A INSTALL OVERLAY PANELS
‡7KHUHDUHWZRVHWVRIKROHVLQWKHKDQGOHVLGHWULP
Replace the handle side trim by installing the original
screws in the REAR screw holes.
‡6HFXUHWKHKDQGOHWRWKHGRRUXVLQJWKH)5217
screw holes.
Custom Handles
If you are using custom handles, the handle must
be properly secured to the panel before sliding the panel
into the trim.
‡7KHFDELQHWPDQXIDFWXUHUZLOOVXSSO\WKHFXVWRP
handle and hardware.
‡6HFXUHWKHGRRUWULPXVLQJQHZKDQGOHVLGHWULP
Discard the supplied handle.
Right hand models shown. Use the same instructions
for left hand models.
Install Door Panel:
‡2SHQWKHGRRUWR ƒ5HPRYHWKH3KLOOLSVKHDGVFUHZV
from the door handle.
‡5HPRYHWKHKDQGOH5HWDLQDOOVFUHZV
‡5HPRYHWKHVFUHZVKROGLQJWKHWULPOLIWRIIWKHWULP
Retain the screws.
‡6OLGHWKHRYHUOD\SDQHOLQWRWKHGRRUWULP
Supplied handle shown
in the overlay panel position.
Door
Door Trim
Handle
Trim
Move
Forward
For 3/4"
Panel
Use Rear Holes
to Secure Trim
Use Front Holes
to Secure Handle
Installation Instructions
19