Shelves and bins, Adjustable bins on the door, Basket removal (bottom drawer) – GE ZFGP21HZSS User Manual

Page 14: Non- adjustable bins on the door, Non- adjustable beverage rack

Advertising
background image

To Remove the 2-Piece Basket:

1 2SHQWKHERWWRPIUHH]HUGUDZHUXQWLO

it stops.

2 Pull the divider forward until the rear locating tabs

are out of the slots. Turn the divider slightly to the

side to release the front locating tabs and lift out.

3 The freezer basket rests on the metal slide

brackets and is held in place with swing locks.

4 Turn the swing locks from horizontal to vertical

position.

5 Lift the front of the basket up, rotate it toward

you, and bring it straight up to remove.

6 Lift the back portion of the basket up and out

of the drawer.

When Replacing the 2-Piece Basket:

1 Place the rear of the basket onto the metal slide

brackets. There will be 2 pins on each underside

of the back that will align for securing the

basket.

2 Seat the front of the basket onto the metal slide

brackets and over the swing locks.

3 Turn the swing locks from vertical to horizontal

position to lock the basket in place.

4 Turn the divider slightly to one side so the tabs

on the front fit into the vent slots on the basket.

Position the divider so the back locating tabs

snap into place in the back vent slots.

Shelves and Bins

Stainless Steel Refrigerator

14

Adjustable bins can easily be carried from
refrigerator to work area.

To remove: Lift bin straight up, then pull out.

To replace or relocate: Slide in the bin just above
the molded door supports, and push down.
The bin will lock in place.

The snugger helps prevent tipping, spilling
or sliding of small items stored on the door shelf.

Grip the finger hold near the rear of the snugger
and move it to fit your needs.

Adjustable

bins on

the door

Appearance may vary

Basket removal

(bottom drawer)

To remove: Lift the bin straight up, then
pull out.

To replace: Engage the bin in the molded
supports on the door and push down. It will lock
in place.

Non-

Adjustable

bins on

the door

To remove: Lift the rack straight up, then pull out.

To replace: Engage the rack in the molded
supports on the door and push down. It will lock
in place.

Non-

Adjustable

beverage

rack

Advertising
This manual is related to the following products: