Additional features, Door alignment door swing clearances – GE ZFGP21HZSS User Manual
Page 15
15
The doors are factory set for a 150°
door swing. To avoid contact damage
to the refrigerator doors or to adjacent
cabinetry or walls, observe the minimum
clearances shown.
• Allow 4” clearance on each side
to an adjacent wall for a 90° open ing
and access to drawers.
• Allow 15” clearance on each side
to an adjacent wall for removal of drawers.
If the top of the doors are uneven, first try to raise
the lowest door by turning the leveling leg on
the same side as the door until the doors are
even. If the unit rocks, re-adjust the leveling
legs to the extent that the unit is stable.
If the doors remain uneven, turn the adjustable
pin to raise, or lower, the left door to match
the right door. Use a 1/4s Allen wrench
to turn the pin.
Additional Features
Stainless Steel Refrigerator
Door
alignment
Door swing
clearances
15"
15"
150˚ Door Swing
90˚ Door Swing
24-5/8"
19-1/16"
Adjustable Pin
Leveling
Leg