GE ZISB360DX - Manual (Page 14)

STEP 11 INSTALL GRILLE PANEL
(for Custom Panel Models only)
To insert the framed or overlay panel into the grille:
‡5DLVHWKHJULOOHSDQHOWRWKHVWRSSRVLWLRQ
14
‡/RRVHQWKHVFUHZVRQWKHVLGHWULPEHKLQGWKHIUDPH
5HPRYHWKHERWWRPWULP
CAUTION:
7KHPHWDOSDQHOPD\EH
slippery. Grip the metal panel firmly so the panel does
not slip out of the frame and cause personal injury or
damage to the frame.
PRUDENCE :
/HSDQQHDXHQPpWDO
SHXWErWUHJOLVVDQW7HQLUIHUPHPHQWOHSDQQHDXHQ
PpWDOGHPDQLqUHjFHTXHOHSDQQHDXQHJOLVVHSDV
en dehors du cadre en provoquant des blessures
corporelles ou des dommages au cadre.
‡6OLGHWKHSDQHORYHUWKHPHWDOEDFNHUSDQHODQGLQWR
the trim.
‡,IQHFHVVDU\WDSZLWKDZRRGEORFNXQWLOWKHSDQHO
slips under the top trim piece.
‡5HDVVHPEOHWKHERWWRPWULP7LJKWHQWKHVFUHZV
‡$GMXVWWKHKLQJHVSULQJWRDFFRPPRGDWHWKHSDQHO
weight, if necessary.
Adjust Nut Below
Spring to Accommodate
Panel Weight
Loosen
Side
Trim
Screw
Loosen
Side
Trim
Screw
Installation Instructions
STEP 10 ADJUST DOOR SWING
127( 7KLVUHIULJHUDWRUKDVDSRVLWLRQGRRUVWRS
When space does not allow the door to swing open
fully to 130°, you may change the door swing to a 90°
opening. Skip this step if door opening is satisfactory
for your installation situation.
‡2SHQWKHGRRUWRYLHZWKHERWWRPKLQJH
1RWHWKHGRRUVWRSSLQORFDWLRQV7KHSLQLVIDFWRU\
installed in the 130° position.
‡&ORVHWKHGRRU)URPEHORZXVHSOLHUVWRXQVFUHZ
the door stop and reinstall into the 90° position.
STEP 9 SECURE REFRIGERATOR
TO CABINETRY
Whenever possible, perform this step for anti-tip
security, or when anti-tip brackets cannot be used.
The refrigerator must be secured to prevent tipping.
‡5DLVHWKHJULOOHSDQHOWRDFFHVVWKHFDVHWULP
‡'ULOODKROHLQWKHWULPDQGGULYHDVFUHZWKURXJK
the trim into the adjacent cabinet.
‡)ROORZWKHVDPHSURFHGXUHRQWKHRSSRVLWHVLGH