GE ZISB360DX - Manual (Page 7)

1/4” FRAMED PANEL DIMENSIONS

If you choose to install framed panels, they must
EHFXWWRWKHGLPHQVLRQVVKRZQ7KHSDQHOVZLOOVOLGH
into the frame on the door and grille.
Non-Dispenser Models
,IWKHFXVWRPSDQHOLVOHVVWKDQµWKLFNDQGLWILWV
loosely in the door frame it can be backed up with
a piece of filler material or foam tape to improve
the fit.
Fresh
Food
Panel
Freezer
Panel
E D
F
G
A
B Grille Panel
C
Dispen-ser
Cutout
9-5/8"
Dispenser Cutout
15-3/8"
6LGHE\6LGH LQLQFKHV
  $ % & ' ( ) *
µ0RGHOV          
µ0RGHOV           
µ0RGHOV          
Dispenser
&XWRXW3RVLWLRQ
IMPORTANT NOTE: Maximum total panel weight:
‡ Fresh food door panel – 75 lbs.
‡ Freezer door panel – 53 lbs.
‡ Grille Panel – 18 lbs.
1/4"
Panel
Door
5/16"
Trim
Reveal
The framed panel must be 1/4” nominal
thickness to fit the dispenser trim.
IMPORTANT NOTE – DISPENSER MODELS
7KHUHIULJHUDWRULVVXSSOLHGZLWKWZRGLVSHQVHUWULPV
one for framed panels and one for overlay panels.
‡,IWKHSDQHOLVOHVVWKDQµWKLFNDQRWLFHDEOHJDS
may be created around the dispenser trim. Foam
tape may be applied on the door to improve the fit.
‡,IWKHSDQHOLVPRUHWKDQµWKLFNWKHGLVSHQVHU
trim cannot be secured to the door.
See Dispenser Trim Fit Example, page 9.
Design Guide