GE ZISB360DX - Manual (Page 18)

18
STEP 14 CONNECT WATER SUPPLY
‡/RFDWHDQGEULQJWKHWXELQJWRWKHIURQW
of the cabinet.
‡7XUQWKHZDWHURQWRIOXVKGHEULVIURPWKHOLQH
5XQDERXWDTXDUWRIZDWHUWKURXJKWKHWXELQJ
into a bucket, then shut off the water.
Copper Tubing:
‡6OLSDµQXWDQGIHUUXOH SURYLGHG RYHUERWKHQGVRI
the copper tubing. Insert the tube into the union fitting
on the unit and tighten the nut to the union.
‡7XUQRQWKHZDWHUWRFKHFNIRUOHDNV
GE SmartConnect ™ Tubing:
‡,QVHUWWKHPROGHGHQGRIWKHWXELQJ
LQWRWKHUHIULJHUDWRUFRQQHFWLRQ7LJKWHQ
the compression nut until it is just hand tight.
‡7LJKWHQRQHDGGLWLRQDOWXUQZLWKDZUHQFK
2YHUWLJKWHQLQJFDQFDXVHOHDNV
‡7XUQRQWKHZDWHUWRFKHFNIRUOHDNV
NOTE: Make sure excess tubing length does not
interfere with the toekick installation.
STEP 13 INSTALL DISPENSER TRIM
Skip this step is you are installing a stainless steel
wrapped or a non-dispenser refrigerator.
7KHUHDUHWZRGLVSHQVHUWULPVVKLSSHGZLWK\RXU
refrigerator. Select the appropriate trim for your
application.
‡3UHVVDQGVQDSWKHGLVSHQVHUWULPLQWRWKHGLVSHQVHU
recess on the refrigerator door.
If an excessive gap exists around the dispenser trim
or if the panel fits loosely in the door frame, foam tape
PD\EHDSSOLHGWRKHOSLPSURYHWKHILW5HPRYH
the trim and panel and apply the foam tape
to the door around the dispenser and in the corners.
&RPSDUHWKHGLVSHQVHUWULPV1RWHWKDW
the inside depth of the frames are different.
&KRRVHWKHWULPZLWKOHVVGHSWKIRUIUDPHG
panels, choose the deeper one for overlay
panels.
Dispenser trim fit over the custom panel depends on
FRUUHFWSDQHOWKLFNQHVV6HHSDJHVDQGIRUSDQHO
construction information.
Framed
Panel
Trim
Overlay
Panel
Trim
Refrigerator
Water Supply
House
Water Supply
Installation Instructions