Asus USB-N13 - Manual (Page 24)

6. Click the Connection tab to view
the signal strength. Click OK to exit
the utility.
5. Click Status to view the association
state. If connection is established,
the box shows “ Connected - xx:
xx:xx:xx:xx:xx”.
Configuring with the WLAN utility (Ad Hoc)
The network adapter supports Ad Hoc mode that allows communication between
wireless stations without an AP.
2. Click Config and set the network
adapter to Ad Hoc connection mode.
1. Right-click the wireless connection
icon and select Wireless Settings.
Chapter 2
2 ASUS Network adapter
Chapter 2 - Installation
Installation