Asus USB-N13 - Manual (Page 32)

Status - IP Config
IP Config tab shows all the current host and
Network adapter information including host name,
DNS servers, IP address, Subnet Mask and
Default Gateway.
Button
IP Release: If you want to remove the current
IP address, click this button to release the IP
address from DHCP server.
IP Renew: If you want to obtain a new IP address from DHCP server, click this
button to renew the IP address.
Ping: Click this button to open “Ping” tab which is used to ping the devices in your
network.
NOTE: The IP Release and IP Renew buttons can only be used on the
network adapter that gets its IP address from the DHCP server.
Status - Ping
Click the "Ping" button in Status-IP Config tab to
open this page. The Ping tab allows you to verify
the accessibility of other computers or network
devices.
To ping a connection:
1. Key in the IP address of the device you want
to verify in the IP Address field.
2. Configure the ping session by assigning
the ping packet size and number of packet to send, and the timeout value (in
milliseconds).
3. Click the “Ping” button.
During the ping session, the Ping button Changes into a Stop button. To cancel the
ping session, click the “Stop” button.
The session field displays information on the verified connection including the
roundtrip time (minimum, maximum, and average) and packets sent, received, and
lost after a ping session.
Click the “Clear” button to clear the session field.
32 ASUS Network adapter
Chapter 3 - Software Reference
Chapter 3
So
ftw
are
R
efe
ren
ce