Brewer Basic 4000/4001 - Manual (Page 13)

Document #100087 RevC 13 Printed in USA © 2010
MAINTENANCE
Preventative Maintenance
• Periodically inspect the electrical cord to ensure it is
free of cuts or damage.
• Inspect the mechanical functions to ensure satisfac-
tory operation.
• Check fasteners to make sure they are present and
secured tightly.
• Periodically inspect the levelers functions to ensure
satisfactory operation.
Cleaning
Upholstery
Regular care should be maintained by daily wiping with a
damp cloth or sponge and periodic cleaning with a mild
soap and water solution.
WARNING
The upholstery material that covers the top of the
table is resistant to most medicinal-type stains, but
may be damaged by solvents and dyes. Remove
any fluids which are spilled on the upholstery im-
mediately. All surfaces should be cleaned within
your facilities guidelines concerning antimicrobials
and bloodborne pathogens.
CAUTION
Turn off drawer warmer and let cool before remov-
ing or cleaning top front drawer. Failure to do so
could result in minor burns.
Painted Metal Surfaces
Wipe all painted metal surfaces with a clean cloth at least
once a week.
Drawers
Regular care should be maintained by wiping out drawers
with a damp cloth or sponge on a regular basis along with
periodic cleaning with a mild soap and water solution. The
drawers may be removed for cleaning.
Unpainted Metal Surfaces
Wipe all unpainted metal surfaces with a clean cloth. Use
FDA silicon lubricant on moving parts.
Tread on Footstep
The protective tread material should be cleaned periodi-
cally by a light scrubbing with a stiff brush, mild soap, and
water.