ALESIS DEQ230D - Manual (Page 7)

Introduction
5
How to Use This Manual
This manual is divided into the following sections describing the
various functions of and applications for the DEQ230. While it's a
good idea to read through the entire manual once carefully, those
having general knowledge about audio equipment should use the
table of contents to look up specific functions.
Chapter 1: Quick Start Guide. If you're already familiar with
equalization, this will get you started using the DEQ230 right away.
It's a short guide to the essential elements of hooking it up and
using it for the first time.
Chapter 2: Connections. This section gives detailed instructions for
connecting the DEQ230 to a variety of typical audio systems.
Chapter 3: Basics of Equalization. This section explains what an
equalizer does and explains the function of each of the controls.
Chapter 4: Applications. Skip to this section for tips on using the
DEQ230 in a variety of settings.
Chapter 5: Program Charts. Here you will find the names for all 60
Factory Programs, with a brief description of each and a small
graphic representation of the front panel settings.
Chapter 6: Troubleshooting. Near the end of the manual you will find
troubleshooting tips and a complete list of the DEQ230’s
specifications.
Helpful tips and advice are
highlighted in a shaded box
like this.
When something important
appears in the manual, an
exclamation mark (like the
one shown at left) will appear
with some explanatory text.
This symbol indicates that
this information is vital when
operating the DEQ230.
The names of specific buttons
on the DEQ230 are printed in
a bold font and bracketed:
i.e., the [BYPASS] button.