AirSep MN138-1 H - Manual (Page 11)

5
MN138-1 Rev H
02/14
1.3 Functional Specifications
Oxygen Concentration: 1-5 liters per minute at 90% +5.5/-3%
1-3 liters per minute at 90% +5.5/-3% (VisionAire 3)
⅛
-2 liters per minute at 90% +5.5/-3% (VisionAire 2)
(Based on 70°F [21°C] at sea level)
Accuracy: ± 10% of indicated flow setting, or ± 200 ml, whichever is greater.
Response Time: Allow 5 minutes to attain maximum oxygen concentration.
Positioning: Operate the unit in an upright position, maintaining at least 12 inches
(30.5cm) of open space on all sides for ventilation.
Dimensions: 20.8 in. high, 14.1 in. wide, 11.5 in. deep
(52.8 cm high, 35.8 cm wide, 29.2 cm deep)
Weight: 30 lb; shipping weight – 37 lb
(13.6 kg; shipping weight – 16.7 kg)
Electrical (+/- 10%) :
115VAC, 60 Hz, 3 amps, 290 watts
115VAC, 60 Hz, 3 amps, 190 watts (VisionAire 3)
115VAC, 60 Hz, 3 amps, 200 watts (VisionAire 2)
220-240 VAC, 50 Hz, 1.5 amps, 290 watts
220 VAC, 60 Hz, 1.5 amps, 290 watts
230 VAC, 50 Hz, 1.5 amps, 180 watts (VisionAire 2)
230 VAC, 50 Hz, 1.5 amps, 175 watts (VisionAire 3)
Alarms: Power Failure
Low Oxygen Concentration (with optional Oxygen Monitor)
Low Pressure
High Pressure
High Temperature
No Flow
Electrical Shock Class II, Type B
Protection:
Operating Temperature 41 to 105°F (5 to 40°C)
Range:
Storage Temperature -4 to 140°F (-20 to 60°C)
Range:
Humidity: 15 – 95% (non-condensing)