Clinton Electronics CE-PTZ10x - Manual (Page 5)

5
Installation and Set up
Unpacking your camera
Your PTZ camera comes with a power supply, as well as a wall mount and a small screw to
attach the camera to the wall mount (plus one extra screw). Carefully remove the contents
from it’s packing and set on a firm surface. Save the packing in case of future service
requirements or transportation needs.
CE-PTZ10x Camera Wall Mount User Manual
Set Screw
(+1 extra )
PACKAGE CONTENTS
DC 24VAC
Power
Supply
The Transparent cover is sensitive and should be handled with care. Do not touch or rub the
surface in any way with the protective foil. Please use a dry cloth to clean the inner and outer
surfaces. For contamination, use a natural detergent. Improper cleaning method will cause permanent
scratches on the cover and cause unclear image or focusing errors of the camera.
3”
4”
Bolt
Ceiling/Wall
Indoor mount bracket
Insert PTZ tabs into mount
holes and turn to lock in place
Install the wall mount bracket
Set screw
Insert PTZ tabs into mount
holes and turn to lock in place
Indoor Mounting
9.8”
7”
Dimensions
3”
4”
Bolt
Ceiling/Wall
Indoor mount bracket
Insert PTZ tabs into mount
holes and turn to lock in place
Install the wall mount bracket
Set screw
Insert PTZ tabs into mount
holes and turn to lock in place
Indoor Mounting
9.8”
7”
Installation