Clinton Electronics CE-PTZ10x - Manual (Page 6)

6
Precautions
For all service or installation needs, please refer to qualified service personnel or system installers
Do not attempt to disassemble the device
To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside.
Contact qualified service personnel for maintenance
Handle the device with care
Do not strike or shake, as this may damage the device. It should be protected against extreme pressure,
vibration, and humidity during transportation and storage. Damages caused by improper transportation
may void the warranty.
Do not use strong or abrasive detergents when cleaning the device’s body and transparent cover.
Use a dry cloth to clean the device when dirty. When dirt is hard to remove, use a mild detergent and
wipe gently.
Do not operate the device beyond its specified temperature or humidity ratings.
Do not use the dome camera in an extreme environment where high temperature or high humidity
exists.
Do not point the camera lens directly into sunlight or any strong light source.
This will cause permanent damage to the camera and voids the warranty.
Read this user manual carefully before operating the device
Make sure local electric safety standards are followed when using or installing the appliance.
Do not install the camera in an orientation other than as designed
And do not bend or squeeze the device as this may damage the mechanical structure of the device and
void the warranty.
Do not touch the cover with bare hands or any object
Doing so may scratch the surface and affect the image quality.