Install a/c pump – Eddie Motorsports MS107-55 User Manual
Page 5
Advertising
WARNING:
Do not start the engine until power steering hoses, reservoir, fluid, etc are
installed and system is filled and bled. See the enclosed instructions for details on this
procedure. Running the pump dry will void the warranty.
Install A/C Pump:
1. Install a/c pump using two M8 x 25 mm cap screws and washers with anti seize. Finger
tighten.
2. Install lower shoulder bolt and washer with anti seize.
3. Install compressor cover using blue thread locker and three 1/4-20 x 3/4 cap screws. Do
not over tighten.
Advertising