Install alternator, Install water pump pulley, Install crank pulley – Eddie Motorsports MS107-55 User Manual
Page 6
Advertising
Install Alternator:
1. Install alternator using one M8 x 25mm and one M10 x 80mm cap screws and washers
with anti seize.
Tighten shoulder bolt and all cap screws on a/c pump and alt at this time.
Install Water Pump Pulley:
1. Install water pump pulley using four 5/16-24 x 1/2” cap screws with red thread locker.
Install Crank Pulley:
Advertising