Hootoo HT-UD01 - Manual (Page 41)

© DisplayLink 2014 – Issue 1 Page 41
DisplayLink USB Graphics User Manual
Software Version 7.6
9. Fit to TV
9.1. What is Fit to TV?
If using your DisplayLink product to connect to a TV, all of the Windows desktop may not be available. Many TVs will
automatically 'overscan' the image they get by cutting off the borders and filling the screen with the image. On some
TVs it may be possible to turn this 'overscan' off in your TVs settings menu, consult your TVs User Manual to see if this
is an option for you. If you can do so, then you will not need to use the Fit to TV function of the DisplayLink
UI.
Fit to TV can be used to reduce the size of the Windows desktop on the TV screen.
Notes: Fit to TV only works in extend mode. If choosing the option while in mirror mode, the DisplayLink screen will
change to extend and be placed above the laptop screen in Windows Display Properties.
Fit to TV will only operate correctly when one DisplayLink device is connected. It is not designed to work on multiple
DisplayLink screens.
Fit to TV does not support rotated modes.
9.2. Configuration
1. To configure Fit to TV, choose the option from the DisplayLink GUI.
The following interface appears
2. You will also see a red border on the DisplayLink screen