Hootoo HT-UD01 - Manual (Page 43)

© DisplayLink 2014 – Issue 1 Page 43
DisplayLink USB Graphics User Manual
Software Version 7.6
10.Additional Information
The following section provides additional information on the use of the DisplayLink USB Graphics software.
10.1. Media Playback
On Windows (XP in extend mode), the DisplayLink USB Graphics device can display media files and DVDs using the
following media players:
 Windows Media Player 12 ( http://www.microsoft.com/windows/windowsmedia/default.mspx )
 Windows Media Player 11 ( http://www.microsoft.com/windows/windowsmedia/default.mspx )
 WinDVD 11 ( www.intervideo.com )
 PowerDVD 13 ( www.cyberlink.com )
The DisplayLink USB Graphics device can display media files and DVDs using most media players. Media playback in
mirror mode (XP) or in Basic mode (Vista and Windows 7) is not recommended.
10.2. Using Multiple DisplayLink USB Graphics devices
The software supports up to six simultaneously USB attached screens. It is also possible that different sets of screens
are being used at different times, for example two in the office and two at home. The software saves each screen’s
display profile separately. This allows for different physical positioning, or different resolutions, of connected monitors
in the office and the home.
10.3. Standby and Hibernate, Shut down and Restart
If the PC that the DisplayLink USB Graphics device is connected to is placed into standby or hibernate mode, the
display goes blank. When the PC is again powered up (and unlocked if necessary) the connected monitor returns to
the same mode as it was before stand by or hibernation.
If the PC is shut down, restarted and logged in, again the connected display returns to the same mode as it was before
shutdown.
10.4. DisplayLink USB Graphics with Multiple Users
DisplayLink USB Graphics work with multiple users on the PC. The mode settings are saved for each user so each can
use their own desktop configuration.
10.5. Disconnecting the DisplayLink USB Graphics
If the DisplayLink USB Graphics device is powered off or the USB cable is removed from the computer, the display
blanks. All windows and icons move to the primary screen.
On reconnection or powering up of the DisplayLink USB Graphics device, the display returns to the same mode as it
was before disconnection. However, windows and icons that were previously on the screen will not be moved back.