Rate and resolution, Top menu – Hootoo HT-IP006N User Manual
Page 19
Security Solutions Partner
19
Rate and Resolution:
Rate: Set video framerate here, from “full-speed to 1fp/5s”. (Figure 3.8)
Resolution: Set the resolution to be 160*120/ VGA(640*480)/ QVGA (320*240). (Figure 3.9)
NOTE: When doing recording, Rate and Resolution parameter settings is very helpful for getting small
sized recording files, the lower parameter to get the smaller file.
Figure 3.8
Figure 3.9
TOP Menu
:
Figure 4.0
:
Click it to get live video. When you want to go back to live video from other menus, just click it.
Only under live video, you can do the operations on the right side, such as play, stop, snapshot etc.
:
Click it to get into play mode, when you click stop icon, the video will be stopped, then click
play icon, it will show the video again.
:
Click it to stop the live video. You can click the play icon if you want to see live again.
:
Click it to get snapshot. It will show the date and time of the snapshot you get, when you want
to save it, you will find the snapshot file named by “snapshot_MAC ID_date_time”.
:
Click it to start recording manually, and the icon will change to red color
,
click it
again, it will stop recording. The record file will be saved to the folder you set. (Figure 10.8-Figure11.0)
:
Click it to hear the sound around the camera, if you plug a earphone or a speaker in the
computer which you are using, you will hear the sound around the camera. This IP Camera has a built-in
microphone, when you click it to start work, the icon will change to red color
,
click it again, will stop
the audio function.
:
Click it to start the talk function, first you have to plug a microphone in your computer. When
you are talking about something with the microphone from your computer, the sound will come out from the
built-in speaker of the camera, people beside the camera will hear the sound. If you are connected to an
external speaker from the audio output hole at the back of the camera (Figure 1.2), you will get better sound
effects. Click it once, the icon will change to red color
,
click it again, will stop talk function.