Hootoo HT-IP006N - Manual (Page 28)

Security Solutions Partner
28
3.1.4 Restore Factory Settings
Click Restore Factory Settings, a pop-up will prompt, select OK, all the parameters will be returned to factory
settings, and the device will reboot.
Figure 5.5
3.1.5 Reboot Device
Click Reboot the device, a pop-up will prompt, select OK, then the device will reboot
Figure 5.6
3.2 Network Settings
Click Network, will pop-up the prompt as below:
3.3 Basic Network Settings
Here you can fix the camera’s IP address; set the static IP address of camera manually.
You can also do the same settings from IP Camera Tool. (Figure 2.3)