Hootoo HT-IP210F - Manual (Page 42)

Security Solutions Partner
42
3.12 PTZ Settings
Figure 8.6
1. Go center on boot: The camera will rotate to the center automatically when it starts
2. PT speed: Set Pan / Tilt speed
3. Upward patrol speed: Set the speed of cruising upward
4. Downward patrol speed: Set the speed of cruising downward
5. Leftward patrol speed: Set the speed of cruising leftward
6. Rightward patrol speed: Set the speed of cruising rightward
NOTE: Value 0 means the fastest, value 10 means the slowest. In order to protect the camera
’s motor, we
recommend that setting the speed to value 5.
3.13 Indicator Settings
Figure 8.7
Set the pilot lamp mode, the following three options:
(1) Non-connected network out: Twinkle while connected to the internet and turn off when departed
(2) Non-connected network with more slow-frequency flicker: Twinkle while connected to the internet and
move slower when departed
(3) Been extinguished: Keep OFF
3.14 Backup & Restore
Figure 8.8