MBRP S7108 - Manual (Page 2)

S7108 © 12/12 PAGE 2 OF 4
2009 DODGE CHALLENGER SE
3.5L V6
Removal of stock system:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2 Remove the rubber exhaust from the rubber insulators.
Refer to Figure 1.
3. Loosen the band clamps on the factory exhaust located in front
of the Y-pipe. Refer to Figure 2.
4. Remove the exhaust from the remaining rubber insulators.
Refer to Figure 3.
5. Remove the exhaust from the vehicle. Refer to Figure 4.
Figure 1
Figure 2
Figure 3
Figure 4